KYORITSU KEW 6516 Digital Multi Function Testers Color LCD Display. The standard package don't include batteries. We can not put them in the package box. At the same time, please forgive us that we are unable to provide the English user manual. ·Color LCD 3.5 inches dot matrix.
·Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs. ·With 2 wire only, very useful in case of no Neutral i.·High test current range of 2? ·Zs Limit compares the values required by Electrical Installations Standard with measured results. ·Type AC, A, F, B(General & Selective), EV and Variable RCDs. ·Single and Auto test, Ramp test and Contact voltage.
·Earth resistance test 2 and 3 wires with all accessories included. ·Resistance test 100, 250, 500 & 1000V with auto discharge voltage. ·Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
·On 3-phase lines with clear indication of the sequence on the display. ·TRMS Voltage measurements 2-600V, Mains Frequency. ·Display shows how to connect the instrument according to the function selected.
·Surge Protection Device test, for SPD that uses varistor. ·Portable Appliance Tester function, for Insulation and Protective conductor resistance test. ·IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557-1,2,3,4,5,6,7,10.0-1000V (goes up by 1V). Res High test current(25A). Nominal test current at 0? External loop: Magnitude/ Duration at 230V. 2000A/20kA L-N(PSC)/ L-PE(PFC). PSC/PFC accuracy is derived from measured loop impedance specification and measured voltage specification. X1/2, x1, x5, Ramp, Auto, Uc. 10/30/100/300/ 500/1000mA(G) 10/30/100/ 300/500(S). 550ms(G):±1%rdg±2ms, 1000ms(S):±1%rdg±2ms. Remarks Correct phase sequence: are displayed "1.2.3" and mark Reversed phase sequence: are displayed "3.2.1" and mark. IEC 61010-1 CAT IV 300V, CAT III 600 V Pollution degree 2 IEC 61010-2-034 IEC 61557-1,2,3,4,5,6,7,10 IEC 60529(IP40) IEC 61326(EMC). LR6 (AA) (1.5V) ×8. 136(L) × 235(W) × 114(D) mm / Approx.
1 7281(Test leads with remote control switch) 7246(Distribution board test lead) 7228A(Earth resistance test leads) 8041(Auxiliary earth spikes[2 spikes/1 set]) 9084(Soft case) 9142(Carrying case) 9151(Shoulder strap) 9199(Shoulder pad) 8212-USBUSB adaptor with KEW Report(Software)'' Instruction manual, Calibration certificate. And it may delay for some cases, like weekend, local holidays or other special situation, your understanding is appreciated. The item will be sent by China post.Feel free to contact me if any problem with the parcel. If this item is in your possession more than 7 days, it is considered as used, in such case, we will not accept refunding or exchanging. Our working time is as below: 10:30 a. M to 8:00 p.
M of Monday to Friday 10:30 a. M to 5:00 p. We apologize for the late reply during the holidays. If any question, please feel free to let me know, i will try to reply your every question asap.This item is in the category "Business, Office & Industrial\Test, Measurement & Inspection\Testers & Calibrators\Other Testers & Calibrators". The seller is "hotmeter" and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.